Oil treatment plant (heater-treater)

Year

2018

Category

Process comlexes

The customer needed an oil treatment unit with heating of the incoming products.

According to the terms of reference, our scientific and technical center has proposed a unit with a volume of V = 115 m³.

We have designed, manufactured, and shipped an automated oil treatment unit designed for separation of oil well products and oil treatment to the required quality standards. The unit is used for efficient heating, dehydration, and desalting of oil emulsions and preparation of commercial oil.

Due to versatile functionality, one UPN unit can simultaneously replace several cleaning systems:

- Dehydration of crude oil;
- Its separation into oil and by-products;
- Obtaining refined oil.

The design was carried out by the design department specialists. The device was manufactured at the Syzran plant.

Would you like to discuss your project?

Our team is ready to implement a project of any complexity.
If you have assignments or questions, leave a request and we will contact you as soon as possible

Leave
a request

Other projects

Mobile indirect heating unit MUKN-0.12K

2021 year

Mobile indirect heating unit MUKN-0.12K was successfully commissioned.

Gas heater PTPG-30M

2021 year

Pre-commissioning works and mode adjustment of start-up and fuel gas heater PTPG-30M manufactured by Bunter Group has been carried out.

End phase pipe divider KDFT-1400-60-4

2016 year

Four sets of KDFT pipe end phase dividers designed for separation of well production and formation water treatment to the required standards were supplied.

Regeneration gas heating furnace

2019 year

The customer needed a regeneration gas heating furnace as part of the gas treatment unit.

Mobile direct heating unit MUPN

2021 year

Mobile direct heating unit MUPN of the formation water separation system was put into operation to provide heating of the incoming liquid with subsequent separation of produced water in the settling units.