Cylinder furnace TsS

Cylinder furnace TsS

Oil and gas equipment

Bunter Group has completed installation of one of the two 019-P-1.1 and 019-P-1.2 furnace units manufactured for the condensate de-ethanization unit. The furnaces are designed for heating and evaporation of light fractions in gas condensate. The capacity of the unit is up to 277,000 kg per hour. The useful heat output of the furnaces is 13.7 MW.

The furnace was started up on June 13. After concrete drying, the furnace operates at temperatures and flow rates higher than nominal modes, providing the de-ethanization column with raw materials of necessary specifications. The actual efficiency of the furnace corresponds to the calculated values.

Cylinder furnaces manufactured by the Bunter Group are supplied to the customer with fuel gas preparation units, inlet product lines, and outlet product lines. Frame valve blocks provide fuel gas supply to pilot and main burners, its reduction, flow measurement, and purification from mechanical impurities. Product line units ensure that the product is evenly distributed across the two coil streams.

The pipeline connection between furnaces and control system with process controller and emergency protection controller allows the furnace to be operated safely in accordance with federal standards and regulations.

Would you like to discuss your project?

Our team is ready to implement a project of any complexity.
If you have assignments or questions, leave a request and we will contact you as soon as possible

Other projects
2021 year
Heater with intermediate coolant PPT-0.2G designed for heating oil emulsions in oil collection and transportation systems, as well as natural or associated gas and waste field water at gas-distributing units of gas-lift oil production system, has been manufactured and shipped to the Customer.
2018 year
Combined flare unit that is designed for high-efficiency and high-quality combustion of periodic, permanent, and emergency discharges of combustible gases at oil and gas field treatment facilities in oil and gas fields, as well as oil, gas, and petrochemical industry enterprises, has been shipped.
2020 year
Capacitance water heater PVE-3.5 with heating capacity of 3.5 MW designed to heat water in the collection, transportation, and well product preparation systems is successfully operated.
2020 year
Gas treatment unit for auxiliaries is designed for purification, heating, and reduction of natural gas pressure of main gas pipelines to the required pressure and maintaining it with a specified accuracy before supplying to the consumer.
2020 year
Our set of AGNKS equipment consists of an external gas accumulator unit and a process enclosure-box.

На этом веб-сайте используются файлы cookie, которые обеспечивают работу всех функций для наиболее эффективной навигации по странице. Если вы не хотите принимать постоянные файлы cookie, пожалуйста, выберите соответствующие настройки на своем компьютере. Продолжая навигацию по сайту, вы предоставляете свое согласие на использование файлов cookie на этом веб-сайте. Более подробная информация предоставляется в нашей политике конфиденциальности